This is the second build of 2.0 Onefinity Firmware. This has a major rebuild that is 64 bit which will work with either RPI3 (in all current controllers) or RPI4. Our internal testing uses this pi4: Amazon.com: Raspberry SC15184 Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (2GB) : Electronics …

I did not try with a PI3. I did try the ALPHA release, on a PI4, and had the same result. Connecting into my machine would be a rather difficult challenge, but one I could make happen if necessary. Let me ask this question, is there a way I can clear out what is in the GCODE buffer / file listing,…

Sure that can be doable, let me check my dev team to send the instructions to do so. Meanwhile, let me investigate this issue with logs. Next steps: We will send the steps to SSH into machine to take the logs if necessary send you the steps to remove the Gcode or will send the another patch if we…

I am very well versed in how to use ssh… where the logs are, sure. But I do need the credentials in order to log in. I have tried bbmc with both buildbotics and onefinity, neither allow me to ssh in.

How do I uninstall 1.2.1. I updated without realizing it was beta :confused:. I’d like to go back in time to the last stable version

[image] Firmware Update 1.0.9 (12/17/21) (Outdated Firmware) Outdated Firmware 1.0.9 is the sixth firmware update for the Onefinity CNC Controller. Download here: onefinity-1.0.9.tar.bz2 (2.2 MB) (sometimes, computers (esp macs) like to ‘unzip’ or decompress the file, e…

1.2.1 is NOT beta, it’s final.

OK, I’m having serious problems since I updated it last week. When transferring a file to the machine via Wi-Fi it sometimes says it is not in gcode which it is, or it simply doesn’t read it at all… After trying the upload several several several times, it may read it. I’m a little frustrated, can y…

[image] shush: I am very well versed in how to use ssh… where the logs are, sure. But I do need the credentials in order to log in. I have tried bbmc with both buildbotics and onefinity, neither allow me to ssh in. So, after hours (not sure how many) the page updated and showed the following…

It means your Wi-Fi signal is weak and all the “bits” aren’t fully going through. This isnt a 1.2.1 problem, it’s a week signal problem. Move your router/extender closer.

2.0.0 Alpha 1 BB Firmware (outdated, 2/18/23)

Firmware (BB Buildbotics) (Discontinued) Outdated Firmware

BManCan (Brian B) February 22, 2023, 3:42am 21

1 Like

Topic		Replies	Views
2.0 Alpha Test Build #0 (outdated) Outdated Firmware	38	3423	February 18, 2023
2.0.0 Alpha 2 BB Firmware (outdated, 3/30/23) Outdated Firmware	13	2042	June 23, 2023
Onefinity CNC Firmware 1.2.1 (2/8/23) (X-35/X-50 machines w/ Buildbotics Controller) (Outdated) Outdated Firmware	288	19906	March 29, 2023
Onefinity CNC Firmware 1.4.1 (7/26/24) (X-35/X-50/Pro machines w/ Buildbotics Controller) (outdate Firmware) Outdated Firmware	30	2088	October 22, 2024
Onefinity CNC Firmware 1.6.2 (2/24/25) (X-35/X-50/Pro machines w/ BB Controller) (Outdated Firmware) Outdated Firmware	45	2595	June 20, 2025

2.0.0 Alpha 1 BB Firmware (outdated, 2/18/23)

Related topics