Controller Not Outputting HDMI or Joystick Signals

[349iq2345]

Hey Steve,

you could try to login to the controller via ssh from remote.

Welcome to the forum!

How to directly connect your Onefinity CNC to a computer/laptop (no screen present) (Buildbotics Controller)

Connecting your Onefinity CNC to a Computer/Laptop (no touchscreen present) Please note: Before you start please make sure wifi is turned off on your computer/laptop (as you will be using an ethernet cable) Turn off internal wifi on your computer/laptop. Make sure that the emergency stop is disengaged/disabled 2a. If this is a brand new machine you will need to turn the emergency stop to get it to “pop-up” out if it’s stored position during shipping Connect up the included power cable to th…

How To Connect To The Onefinity Controller Without A Screen Directly Connected Via The HDMI

1F connection with no touchscreen Before you start please make sure wifi is turned off in your laptop (as you will be using an ethernet cable) Make sure that the emergency stop is disengaged/disabled 1a. If this is a brand new machine you will need to turn the emergency stop to get it to “pop-up” out if it’s stored position during shipping Connect up the included power cable to the 1F controller Connect up an ethernet cable with one end plugged into the 1F controller and the other conn…

No signal on Screen / No video output from controller - Troubleshooting Video

If the screen is turning on and showing a blue splash screen but no input video, try the following: (this should be an obvious first step, but make sure everything is plugged in exactly as this faq shows (a lot of people forget the wall power plug): How to connect the Touch Display (7, 8, 10.8")) Plug a different device (dvd player, xbox/ps, cable box, etc) into the screen and see if it displays video. If it does, the screen is fine. Try a different hdmi cable. This will determine the h…