For the first few days I had the Onefinity, it was really nice to be able to send files to it via Masso Link. After those first few days though, it stopped working, and now I get the following error whenever I try to send a file after connecting : “An error occurred while transferring file”. Anyone experience this?
Sounds like your USB stick lost it’s connection. There is a problem with the USB extension with it being too loose and the controller losing link. You will either have to find a stick that fits tight or start a support ticket with Masso and they will get you a new extension.
1 Like
The USB stick works fine when I transfer files to it and insert it into the controller. Do you still think the looseness of the stick could be the case?
Yes. If the stick has any wiggle it will lose connection. Mine would work fine and then it would lose connection without really doing anything.
Is there some way to confirm that a loose usb stick is the cause of this? Like maybe if I duct tape the USB stick in real tight and see if it then transfers?
You can put the stick into one of the internal ports.
1 Like
FWIW, I contacted Masso, and the issue was NOT a hardware one, but simply a settings one. The way I fixed this (on OS X) was to move the Masso Link application to a different directory. Since the software looks locally for a configuration file, and the configuration file was the cause of this issue, moving the application to a different directory forced the software to create a new configuration file, and the software started working as expected.
1 Like
I’ll try this too. I’ve had this problem off and on.