I stopped a job at a tool change (I do not have a ATC). I made a change to my file on vectric and reloaded the file. When I tried to re-home the machine the Masso screen would not respond. I still have power but an unable to see anything on the screen. I have tried changing my USB, shutting down…

It is working. Once I powered down and removed the cable from the back of the Masso and re-installed the cable…powered up and it works. I tried the same procedure a second time and the same thing happened. Removed cable and everything worked again. Must be a bug in the Masso system to not allow …

Power down Pull the USB Check your cable connections to the Masso Now see if you can power up to the home screen It could be a bad USB Generally don’t pull the USB mid run-it gets confused

Contact support, I did. And they helped me.

Try chainging the fuse in the Masso (SCREEN 1 amp in the diagram) power supply. [image] Elite Masso Power Supply Fuse Schematics FAQ Official 1F Elite (Gen 1) (MASSO) FAQs Elite Fuse Schematic.pdf (203.0 KB) [fuse1] [Elite Power Supply Front] Links to rep…

Masso Screen stopped responding and is now black

Elite Series (Masso & Redline) (Gen 1)

OnefinityCNC (Onefinity CNC Official ✅) December 23, 2025, 7:39pm 4

Try chainging the fuse in the Masso (SCREEN 1 amp in the diagram) power supply.

Topic		Replies	Views
Masso blank screen Controller (MASSO) Discussion	11	194	January 29, 2026
Masso scereen wont power on Controller (MASSO) Discussion	2	157	October 9, 2024
Masso touchscreen not accepting touches Elite Series (Masso & Redline) (Gen 1)	5	366	July 1, 2024
Masso Touchscreen Not Responding To Touch Input Controller (MASSO) Discussion	5	231	September 23, 2024
Unresponsive Masso Touch Screen Troubleshooting (Elite Series)	4	159	February 23, 2026

Masso Screen stopped responding and is now black

Related topics