Just put together my newly arrived machine…followed the on-line manual religeously, as well as referrencing the setup video - both on the Onefinity website. When I came to power on the system all seemed fine, but the touch screen was frozen with a box (homing yes or cancel) displayed, waiting for i…

Look for the mouse pointer on the screen to make sure it’s over the button. I’ve noticed that sometimes it does not align exactly and I have to “touch” a half-inch or so below my desired “click-point”. Usually happens when I adjust the angle of the screen… I also plan to add a mouse in the near futu…

The mouse pointer is over the corner of the overall pop-up box, but doesn’t respond to touch to move or click…it’s dead.

I have the same situation. The cursor is about 1/2" above the Yes box to start the homing process. I keep reaching for a mouse. There are 3 cables that come with this larger (10") display. One is HDMI on both ends. There are also 2 USB 2 to USB 3 cables and an AC power adaptor. So I have the HDM…

You can plug in a standard USB mouse to get going and troubleshoot the touchscreen in parallel…I know I was very excited to start making chips. Cheers Al

I connected the control box to the touchpad display as per online manual: hdmi to hdmi mini, usb A to usb C, and wall plugged the voltage converter connecting it to the 12vdc in……display worked, but touch not working and cursor frozen on the homing pop-up box. Checked it many times, even with other …

Did you try swapping the USB plug-ins attached to monitor? When I first connected mine, my touch didn’t work but I literally just switched the USB cords on the side of the monitor and then the touch worked fine. I have also had the issue with the touch screen not working properly and I just restar…

Yes, I swapped out the usb (usb A to usb C) cables with one that I knew was good. Still didn’t work. And I restarted the touchpad many times. I did connect a regular mouse and a regular (non-touch) monitor and it worked fine…mouse moved the cursor and clicks worked…I talked to support and they wi…

Just received OF on Monday, was jogging router with touch screen and joy stick with no problems, homing went fine, then while trying to zero xyz over work piece the screen went black with white info like the gcode file but froze there and I can’t clear it away and start over. Checked all wires and c…

Has anyone helped you resolve this issue? If so, what was the problem. I’m having the exact same problem. It is random. Sometimes it works fine, other times it just freezes. I just home all my Axis, and when trying to set my offsets, the screen was frozen.

Actually, I connected a mouse and can home and execute programs. The problem with mine appears to be the actual touchpad failing to work with the touchscreen. I emailed support just a few moments ago.

Touchscreen frozen

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

OnefinityCNC (Onefinity CNC Official ✅) December 4, 2021, 5:21pm 12

You’ve most likely not connected the screen properly.
Check this faq here:

Topic		Replies	Views
Frozen home screen Controller (Buildbotics) Discussion	8	821	August 28, 2021
Touch screen is frozen Uncategorized	8	903	June 2, 2023
Touch screen issue TouchScreen	13	1756	January 5, 2023
Screen frozen cant click on anything Troubleshooting (X35/X50)	11	643	June 2, 2024
Asus touch screen not working Uncategorized	7	1491	December 23, 2024

Touchscreen frozen

Related topics