Hello, When I move X and Y manually from the command touchpad (example 5’‘) The Y moves 5’’ but the X moves 8’'. How I can calibrate th [20210919_114906] e 2 axes equal? Anyone knows? see my picture

Hey Yvan, this may be a duplicate of X-axis positioning issues

5x1.6=8…you have a 1616 ballscrew in your X axis now yeah? Upgrade to X-50 Rail? You need to adjust your travel per rev in the motors tab

You most likely have the updated X-50 x rail which requires adjusting the x settings for the ball screw: [image] Proper Motor Settings for x-50 rails (Woodworker and Journeyman), with 1616 ball screw configuration Controller (Buildbotics) FAQ UPDATE: With the release of 1…

Hello Aiph5u, thank you for your anwers. Finaly it is about the X-50 Rail that I have. I have to change the travel rev of the x motor from 10mm to 16mm. Everyting is fine now

Hello Alldaysammyj, thank you for your help. Yes you are right about this. It is working now .Thanks

Thank you very much for your help on this. Now it is working perfectly! Thanks

X not equal to Y (solved, adjust trav per rev with an x-50 x rail)

Uncategorized

OnefinityCNC (Onefinity CNC Official ✅) September 19, 2021, 5:12pm 4

You most likely have the updated X-50 x rail which requires adjusting the x settings for the ball screw:

Topic		Replies	Views
X-axis positioning issues Troubleshooting (X35/X50)	5	1607	September 3, 2021
X-50 Upgrade - Machine Settings - Issue with X axis Original/PRO Series (Buildbotics) (Gen 1)	7	1791	September 23, 2022
Incorrect X axis readings Uncategorized	5	1044	January 18, 2022
Are Y-Axis and X-Axis perfect 90 Degrees? Troubleshooting (X35/X50)	18	1284	June 10, 2023
Question on Elite X&Y Axis settings Elite Series (Masso & Redline) (Gen 1)	2	150	November 10, 2024

X not equal to Y (solved, adjust trav per rev with an x-50 x rail)

Related topics