My machine froze during a carve and the Z axis hasn’t been able to move since then. I have tried turning off/on the machine and resetting the errors in the settings page, but it still won’t move on the Z axis. When I try to home the machine, it shows as moving on the controller but the CNC d…

I tried to swap the motors but the Z motor has an extra 3/8” or so of length of metal between the motor and the drive gear so it doesn’t fit on the X mount. I air blew and rehooked everything on the existing motors and the issue is still occurring. The Z motor is flashing an error light as soon as …

The motor are identical, the motor couplers are identical, the placement ‘stick out’ of the motors are different, adjusted by the motor coupler grub screws. Try the swap and adjust the couplers accordingly.

Thank you, that is working intermittently. There seems to be an issue with the Z3 connection. If I hold it in place it will work and home properly, but at it’s default spot with the cover on, the connection comes loose. Can you please have support arrange a new Z3 cable for me and email the info t…

[image] Cable - Replacement Elite Z3 Pigtail Cable | Onefinity USA This is a replacement Z3 pigtail cable for Elite machines only. This is the short cable that goes from the Z motor to the z2-z3 drag chain cable in the X axis. Compatable with: Elite Foreman Elite Journeyman Elite Woodwor…

Z Axis Alarm Won’t Reset

Elite Series (Masso & Redline) (Gen 1) Troubleshooting (Elite Series)

OnefinityCNC (Onefinity CNC Official ✅) September 18, 2024, 8:15pm 2

Physically Swap the Z and X motor and visa versa, reboot, clear motor alarms, and try homing.

Topic		Replies	Views
Z axis is crazy (solved, replaced extension wire) Troubleshooting (X35/X50)	4	2357	October 9, 2022
Z Axis Motor Failure	1	222	October 17, 2024
I think there's a motor defect. Please take a look Original/PRO Series (Buildbotics) (Gen 1)	10	784	January 11, 2022
Z axis motor bound up Elite Series (Masso & Redline) (Gen 1)	3	141	May 5, 2025
Immediate Z error when home after restart Elite Series (Masso & Redline) (Gen 1)	8	377	May 26, 2025

Z Axis Alarm Won’t Reset

Related topics