After I posted this I remembered that when I first got my machine, I checked that it had the 20mm slider, I’ll wager that 1f sent me an SD card set for the 16mm, so will try to reset it next time am in the shop, Onefinity sent new SD card, installed it this morning, machine seems to be operating no…

[image] How To Reset The Configuration To Defaults (BB Controller) Controller (Buildbotics) FAQ Occasionally, there may be a time when you need to reset the machine back to factory defaults. Here’s how to perform a configuration reset. Please note, resetting the configur…

I reset the machine to default, after some thought & it did not change the machines behavior. But the machine acting as if it has the 16mm Z axis when it should be set for the 20mm Z slider would explain why the machine is responding properly except in the Z height. Please let it be this.

Z probe sets wrong hght

OnefinityCNC (Onefinity CNC Official ✅) February 22, 2024, 3:14pm 2

Topic		Replies	Views
Z Axis doesn't lower enough during program to carve, AND its not cutting to scale (solved, reset config) Original/PRO Series (Buildbotics) (Gen 1)	2	84	April 25, 2025
JourneyMan Z Axis Plunges Too Deep above F360 Lenght (solved, wrong z config set)	2	294	March 20, 2024
Z zero off around 1/32 after probe	3	434	April 28, 2022
XYZ probe is setting Z too deep Touch Probe	39	3360	March 27, 2026
Z motor settings configuration Original/PRO Series (Buildbotics) (Gen 1)	1	464	December 6, 2022

Z probe sets wrong hght

Related topics