My monitor is now intermittent. It is turning the screen on and off. It is not losing power or connection. I have checked connections but just cannot stop the problem. This is a new issue. Any ideas or suggestions

I’ve been having this issue lately as well. It happened today actually.

I have the same issue. emailed tech support and they said to make sure you turn monitor on first and not have spindle or other things plugged in with controller and monitor. I had just changed my spindle cooler to the plug strip with controller and monitor and that may have caused it. It did not do…

I have my monitor on a separate power strip . Most every thing else is 220 volts.

Ensure you have it connected properly: [image] How to connect the Touch Display (7, 8, 10.8") Screens When connecting a touchscreen to the Onefinity controller there are a few key items to make it work correctly: Step 1: POWER: Every screen must be connected to external…

Thank you for the info. All connections are correct and in place. The power is separate. So I am trying the ferrite rings suggested If no luck I will consider a different monitor.

I have the exact problem over the last month. I have email tech for onefinity changed cables etc. still happening.

Ferrite rings is the next step. It’s an emi issue in your home environment.

Thanks we will give that a try just weird that everything was fine for 2 months.

Byron mine was fine for about 7 weeks I agree wierd

[image] I added the ferrite rings to the monitor. Still need to test . Are there other places to put some of the 57 extra ferrite rings

10” monitor is intermittent EMI (Solved, Ferrite Chokes stopped the flicker)

Uncategorized

OnefinityCNC (Onefinity CNC Official ✅) September 3, 2021, 2:44pm 5

Ensure you have it connected properly:

Topic		Replies	Views
New machine blinking screen (solved, ensure screen is plugged into wall power) Uncategorized	4	1676	September 22, 2021
Monitor flickering TouchScreen	14	1985	December 8, 2021
It on, no it’s off, no it’s on just kidding Troubleshooting (X35/X50)	2	487	March 5, 2023
Screen Flickering - tried forum suggestions already Troubleshooting (X35/X50)	10	670	December 3, 2022
2.2.kw 80mm spindle Original/PRO Series (Buildbotics) (Gen 1)	0	565	August 10, 2021

10” monitor is intermittent EMI (Solved, Ferrite Chokes stopped the flicker)

Related topics