When i click the power off button in the lower left corner of the screen, the device stays on. Ive waited 45 minutes, and no change. The only way I’ve been able to turn it off is unplugging it.

Once the display goes blank you can power off the controller

I don’t have a screen so always take to the E stop. Is this just me?

Definitely shouldn’t be hitting the estop to turn off the machine. Flyout menu, shutdown.

You obviously interact with the controller somehow… So shut it down from that device and once it shows disconnected give it another 15 to 30 seconds and hit the power switch… E stop is an emergency stop… You are essentially crashing the hardware every time and putting the data at risk. This is not a…

Thank you for engaging, all. On the 8" standard issue magedock purchased from onefinity, I go to the flyout menu, click on power symbol at the bottom, then select “Shutdown” to confirm. The Onefinity logo splashscreen appears with a message “Booting…” with some code. [Code]

[image] Proper Shutdown on the Onefinity CNC Controller (Buildbotics) FAQ [Proper Shutdown on the Onefinity CNC] If the screen does not shut down after powering down and flipping the power switch: There are times when the controller will stay on after flipping t…

[20240429_121300] I just started getting this also. I was having problems thinking it was EMI. When I found out that I couldn’t clear old gcode off of my black box I reflashed the memory card. Seems all of my problems went away but developed this on shutdown. I can reboot but not shut down. I shut…

@allen220 normal for rocker switch bb controllers: [Proper Shutdown on the Onefinity CNC]

Onefinity won't turn off

OnefinityCNC (Onefinity CNC Official ✅) November 5, 2022, 5:24pm 8

Topic		Replies	Views
Question about controller	6	739	April 8, 2022
Can't close program through touch screen Original/PRO Series (Buildbotics) (Gen 1)	6	120	December 23, 2024
Proper Shutdown on the Onefinity CNC BB controller (original and pro models) Controller (Buildbotics) FAQ	0	2863	March 4, 2022
Shutting down controller Troubleshooting (X35/X50)	10	1204	February 14, 2022
Onefinity screen froze on start up	20	1436	April 22, 2022

Onefinity won't turn off

Related topics