Finally! 
Now I wonder where I can get thick rounded wood for this.
1 Like
rounded wood? you mean for the revolution? If so large dowels would be an expensive but handy starting point.
1 Like
Just curious as to what your order number was…
I got my shipping notice in the mail today as well. Order #51805.
Thanks for that. Looks like I might be in the next batch or so 
We are just packing up the first rotary units now. They will all be Elite Series in this first batch.
Elite versions:
If you have a machine from before 12/5/24, you’ll want to update to our latest configuration and masso firmware 5.07 (we do not recommend 5.09 at this time due to bugs). This latest configuration has the rotary axis preconfigured:
Buildbotics versions:
We are still finalizing the housing for the board that splits the BB controller, so BB controller rotaries will be a bit behind. If you ordered a BB rotary, go ahead and update to firmware 1.6.2 to prepare in the mean time!
2 Likes
you don’t, you use regular boring old square wood and MAKE it round
congratulations!
3 Likes
Rotary received and installed! Everything seems to be working. Now need to try doing my 1st rounded carved. Only issue here is that banana plug for probing was very stuck hard. Even with pliers I had a hard time removing it. Now it’s damaged.
2 Likes
those of us less fortunate need the order number! how else can we see where we are? LOL
1 Like
As far as I know the order numbers aren’t specific to what you ordered. So you could be 5000 higher yet most in between the order numbers are something completely different so they may have already shipped or may not ship until after what you ordered has shipped. All you can hope for is to hear the news they are now shipping. In the case of the BB version that 1f has all the parts needed and will start shipping any day. Does t suck, sure. Who doesn’t want what they paid for getting delivered the next day. Why do you think Amazon became so big? But it is what it is and IMO 1F is trying to do everything they can to fill orders as quickly as possible. So I’ll wait.
1 Like
My rotary was delivered on Monday…Yay. I never got any heads up from Onefinity. But it is here.
1 Like
Has anyone else with a Woodworker or Journeyman received their Rotary units already? If yes, did it have the X-axis riser blocks mentioned in the instructions?
My rotary arrived on the weekend but seems to be missing these 1/2” risers blocks. I have already contacted Onefinity and they are working to sort out the missing pieces. I believe these risers are required or at least recommended in order to provide sufficient clearance for the gantry to clear over the rotary.
Thanks.
Spindle arrived…for wrong controller
Rotary arrived…with missing risers blocks
0 for 2 with Onefinity this week…so far
Laser arriving later this week..
Will it be 0 for 3 or 1 for 3..place your bets!