Touch Screen stops responding

[Aiph5u (Aiph5u (not affiliated with Onefinity))]

Hey Tim,

this is a frequently asked question/reported issue. You can use the search function of this forum.

@Aiph5u

Have you checked that the Touch monitor is connected with all three(!) cables? 1. The HDMI cable, 2. the USB cable for the touch function, 3. AND the third cable for the monitor’s external power supply that is plugged in in a wall outlet?

There is an image on how to connect these three cables in the Onefinity Manual on page 38/39.

The in-detail explanation why you need three cables is here.

2. It could be caused by EMI. This sounds like the frequently reported EMI-caused monitor intermittent issue. This is usually solved by getting ferrite cores, …

@Aiph5u

… or it can be caused by spindle cables that are not shielded or a machine that is not properly grounded and bonded , or by using a VFD that is not mounted inside a control cabinet.

As a workaround, you could attach any HDMI (or DVI-D or DVI-I which is compatible to HDMI) computer monitor or TV to the Onefinity Controller, and a USB keyboard and mouse. Or continue to work remotely via laptop.

@TimJ

At first, I thought it was a communication issue between the laptop and the controller, so I didn’t use the laptop on this carve and it still happened.

In case the display stays black, you can still connect with the laptop later, even during the run of a program.

Welcome to the forum!